Change Car Shock Absorbers Jeep Wrangler

Change Car Shock Absorbers

Easy 0h45–1h30 ~75–150€
Temps estimé 0h45–1h30
Coût estimé ~75–150€
Difficulté Easy
Motorisations
Wrangler 1986-1996 1
  • 4.0 Gas (ERH)
Wrangler 1997-2006 2
  • 2.4 Gas (ED1)
  • 2.5, -LPG LPG,Gas (HX (EPE))
Wrangler 2007-2018 2
  • 3.6 V6, -LPG LPG,Gas (ERB)
  • 3.8 V6 Gas (EGT)
Renew both front shock absorbers 0h45–1h30
Renew both rear shock absorbers 0h45–1h30

What is the function of Jeep Wrangler shock absorbers?

The shock absorber controls the relative movement between the wheel and the vehicle body. This control is essential for good road holding, preventing loss of grip between the tyres and the road surface, and ensuring passenger comfort.

When should you change the Jeep Wrangler shock absorbers?

Shock absorber wear is gradual. Warning symptoms include: vehicle sensitive to crosswinds, increased braking distance, difficulty maintaining trajectory in curves, vehicle bouncing excessively over bumps, uneven tyre wear. Replace between 80,000 and 150,000 km. Always replace in pairs.

Is it difficult to change Jeep Wrangler shock absorbers?

Difficulty level 2/5: technically easy but requires specific tools (spring compressors for McPherson struts, torque wrench). A wheel alignment is recommended after the work.

4 générations couvertes

Génération Période Motorisations Carburant
Wrangler 1986-1996 1986-1996 2.5 MPFI Gas (EPE), 2.5 TBI Gas (EPE), 4.0 Gas (ERH), 4.2 Gas (6L) Gas
Wrangler 1997-2006 1997-2006 2.4 Gas (ED1), 2.5, -LPG LPG,Gas (HX (EPE)), 4.0 Gas (ERH) Gas, LPG
Wrangler 2007-2018 2007-2018 3.6 V6, -LPG LPG,Gas (ERB), 3.8 V6 Gas (EGT) Gas, LPG
Wrangler 2018-2025 2018-2025 3.6 V6 Gas (ERC), 3.6 V6 VVT E-Torque 48V (MHEV),Gas (ERG) 48V (MHEV), Gas