Change Car Accessory Belt Kit Jeep Wrangler

Change Car Accessory Belt Kit

Easy 0h30–0h45 ~50–75€
Temps estimé 0h30–0h45
Coût estimé ~50–75€
Difficulté Easy
Motorisations
Wrangler 1986-1996 1
  • 4.0 Gas (ERH)
Wrangler 1997-2006 2
  • 2.4 Gas (ED1)
  • 2.5, -LPG LPG,Gas (HX (EPE))
Wrangler 2007-2018 2
  • 3.6 V6, -LPG LPG,Gas (ERB)
  • 3.8 V6 Gas (EGT)
Wrangler 2018-2025 1
  • 3.6 V6 Gas (ERC)
Renew the ancillary drive belt 0h30–0h45
Renew the engine oil and filter 0h45

What is a Jeep Wrangler accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Jeep Wrangler accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Jeep Wrangler accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

4 générations couvertes

Génération Période Motorisations Carburant
Wrangler 1986-1996 1986-1996 2.5 MPFI Gas (EPE), 2.5 TBI Gas (EPE), 4.0 Gas (ERH), 4.2 Gas (6L) Gas
Wrangler 1997-2006 1997-2006 2.4 Gas (ED1), 2.5, -LPG LPG,Gas (HX (EPE)), 4.0 Gas (ERH) Gas, LPG
Wrangler 2007-2018 2007-2018 3.6 V6, -LPG LPG,Gas (ERB), 3.8 V6 Gas (EGT) Gas, LPG
Wrangler 2018-2025 2018-2025 3.6 V6 Gas (ERC), 3.6 V6 VVT E-Torque 48V (MHEV),Gas (ERG) 48V (MHEV), Gas