Change Car Handbrake Cable Honda Prelude

Change Car Handbrake Cable

Very easy 0h30 ~50$
Time Estimate 0h30
Cost Estimate ~50$
Difficulty Very easy
Vehicles
Prelude 1987-1992 1
  • 2.0i 16V Gas (B20A5)
Check the parking brake* 0h30
Adjust the parking brake 0h30
Check the brake pedal travel 0h30
Carry out the parking brake basic adjustment procedure 0h30
Check the parking brake shoes* 0h30
Remove/refit the left parking brake cable 3h30
Renew the left parking brake cable 3h30
Remove/refit the right parking brake cable 3h30
Renew the right parking brake cable 3h30
Remove/refit both parking brake cables 3h30
Renew both parking brake cables 3h30
Remove/refit the rear left parking brake cable 1h30
Renew the rear left parking brake cable 1h30
Remove/refit the rear right parking brake cable 1h30
Renew the rear right parking brake cable 1h30
Make parking brake compensator functional 0h30
Check the parking brake cable 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Remove/refit the parking brake lever 0h45
Renew the parking brake lever 0h45
Repair the parking brake lever 0h30
Clean the parking brake shoes* 0h30
Mechanical parking brake* 0h30
Difficult parking brake cable removal* 0h30

What is the function of Honda Prelude handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my Honda Prelude have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the Honda Prelude handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change Honda Prelude handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.

Related products →
Maintenance plans for your Prelude →

5 generations covered

Generation Years Vehicles Fuel
Prelude 1979-1983 1979-1983 1.8 12V Gas (EK1) Gas
Prelude 1982-1988 1982-1988 1.8 8V EX Gas (ET2 (A18A1)), 2.0 12V Gas (A20A4) Gas
Prelude 1987-1992 1987-1992 2.0i 16V Gas (B20A5), 2.1 16V Gas (B21A1) Gas
Prelude 1991-1997 1991-1997 2.2 16V SOHC Gas (F22A1), 2.2 16V VTEC Gas (H22A1), 2.3 16V DOHC Gas (H23A1) Gas
Prelude 1996-2001 1996-2001 2.2 16V VTi Gas (H22A4) Gas

Other repair guides

Change Car Accessory Belt Kit

Easy 0h45

Change Car Air Filter

Very easy 0h30

Change Car Battery

Very easy 0h30

Change Car Cabin Filter

Very easy 0h45

Change Car Clutch

Technical 13h00

Change Car Front Brake Discs and Pads

Easy 1h30

Change Car Front Brake Pads

Easy 1h30

Change Car Fuel Filter

Easy 0h30

Change Car Oil Filter

Easy 0h30

Change Car Rear Silencer

Easy 1h30

Change Car Shock Absorbers

Easy 3h00

Change Car Spark Plugs

Easy 0h30

Change Car Timing Belt Kit

Very technical 5h00

Change Car Water Pump

Easy 4h00
Check the maintenance log for your vehicle →