Change Car Accessory Belt Kit Honda Prelude

Change Car Accessory Belt Kit

Easy 0h45 ~75$
Time Estimate 0h45
Cost Estimate ~75$
Difficulty Easy
Vehicles
Prelude 1987-1992 1
  • 2.0i 16V Gas (B20A5)
Renew the air-conditioning compressor drive belt 0h45
Renew the ancillary drive belt Without air conditioning 0h45
Renew the ancillary drive belt With air conditioning 1h00
Renew the ancillary drive belt 0h30
Renew the engine oil and filter 1h00

What is a Honda Prelude accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Honda Prelude accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Honda Prelude accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

5 generations covered

Generation Years Vehicles Fuel
Prelude 1979-1983 1979-1983 1.8 12V Gas (EK1) Gas
Prelude 1982-1988 1982-1988 1.8 8V EX Gas (ET2 (A18A1)), 2.0 12V Gas (A20A4) Gas
Prelude 1987-1992 1987-1992 2.0i 16V Gas (B20A5), 2.1 16V Gas (B21A1) Gas
Prelude 1991-1997 1991-1997 2.2 16V SOHC Gas (F22A1), 2.2 16V VTEC Gas (H22A1), 2.3 16V DOHC Gas (H23A1) Gas
Prelude 1996-2001 1996-2001 2.2 16V VTi Gas (H22A4) Gas