Change Car Front Brake Discs and Pads Honda Prelude
Change Car Front Brake Discs and Pads
| Time Estimate | 1h30 |
|---|---|
| Cost Estimate | ~150$ |
| Difficulty | Easy |
| Vehicles |
Prelude 1987-1992 1
|
| Renew both front brake discs | 1h30 |
| Renew both rear brake discs | 1h30 |
What is the role of brake discs and pads on a Honda Prelude?
When you press the brake pedal, hydraulic pressure pushes the brake caliper pistons, which press the brake pads against the rotating discs. Through friction, kinetic energy is converted into heat, slowing the vehicle.
When should you change the Honda Prelude front brake discs?
Brake discs should be measured with a micrometer; if below minimum thickness stamped on the disc, replacement is mandatory. Discs typically last 60,000–80,000 km. Always replace discs in pairs.
Why change discs and pads together on the Honda Prelude?
It is strongly recommended to change discs and pads together to ensure optimal braking performance. New pads on worn discs will not bed in properly, leading to reduced braking efficiency, noise, and uneven wear.
Is it difficult to change Honda Prelude front brake discs and pads?
Difficulty level 2/5: technically easy. Key steps: raise the vehicle, remove the wheel, unbolt the caliper and bracket, slide off the old disc, clean the hub face, fit the new disc, refit the bracket and caliper with new pads. Pump the brake pedal before driving.
5 generations covered
| Generation | Years | Vehicles | Fuel |
|---|---|---|---|
| Prelude 1979-1983 | 1979-1983 | 1.8 12V Gas (EK1) | Gas |
| Prelude 1982-1988 | 1982-1988 | 1.8 8V EX Gas (ET2 (A18A1)), 2.0 12V Gas (A20A4) | Gas |
| Prelude 1987-1992 | 1987-1992 | 2.0i 16V Gas (B20A5), 2.1 16V Gas (B21A1) | Gas |
| Prelude 1991-1997 | 1991-1997 | 2.2 16V SOHC Gas (F22A1), 2.2 16V VTEC Gas (H22A1), 2.3 16V DOHC Gas (H23A1) | Gas |
| Prelude 1996-2001 | 1996-2001 | 2.2 16V VTi Gas (H22A4) | Gas |