Change Car Rear Silencer Chrysler Sebring

Change Car Rear Silencer

Easy 0h45–1h30 ~75–150$
Time Estimate 0h45–1h30
Cost Estimate ~75–150$
Difficulty Easy
Vehicles
Sebring 2001-2006 2
  • 2.4, -LPG LPG,Gas (EDZ)
  • 2.7 V6, -LPG LPG,Gas (EES)
Sebring 2007-2010 2
  • 2.4 Dual VVT Gas (ED3)
  • 2.7 V6 Bioethanol (E85),Gas (EER)
Remove/refit the silencer 0h45
Renew the silencer 0h45
Repair the silencer* 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Repair the main silencer 0h30
Align the main silencer 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h45
Renew the rear silencer 0h45
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h30–0h45
Difficult rear silencer removal* 0h30
Remove/refit both centre silencers 1h30
Remove/refit the centre and rear silencers 0h45
Renew the centre and rear silencers 0h45
Remove/refit the front silencer bracket 0h30
Renew the front silencer bracket 0h30
Remove/refit the main silencer bracket 0h30
Renew the main silencer bracket 0h30
Remove/refit the rear silencer bracket 0h30
Renew the rear silencer bracket 0h30

What is a Chrysler Sebring rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Chrysler Sebring rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Chrysler Sebring rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

Related products →
Maintenance plans for your Sebring →

3 generations covered

Generation Years Vehicles Fuel
Sebring 1994-2000 1994-2000 2.0 Gas (ECF), 2.4 Gas (EDZ), 2.5 V6 Gas (EEB (6G73)) Gas
Sebring 2001-2006 2001-2006 2.4 Gas (EY7), 2.4 PZEV LPG,Gas (ED2), 2.4, -LPG LPG,Gas (EDZ), 2.7 V6 FFV LPG,Gas (EEE), 2.7 V6 Gas (EER), 2.7 V6, -LPG LPG,Gas (EES), 3.0 V6 Gas (EF7) Gas, LPG
Sebring 2007-2010 2007-2010 2.4 Dual VVT Gas (ED3), 2.4 PZEV Dual VVT Gas (EDG), 2.7 V6 Bioethanol (E85),Gas (EER), 3.5 V6 Gas (EGF) Bioethanol (E85), Gas

Other repair guides

Change Car Accessory Belt Kit

Easy 0h30–1h00

Change Car Air Filter

Very easy 0h30

Change Car Battery

Very easy 0h45

Change Car Cabin Filter

Very easy 0h30–5h00

Change Car Clutch

Technical 5h00–6h00

Change Car Front Brake Discs and Pads

Easy 1h30

Change Car Front Brake Pads

Easy 0h45

Change Car Fuel Filter

Easy 0h45

Change Car Handbrake Cable

Very easy 0h30

Change Car Oil Filter

Easy 0h30

Change Car Shock Absorbers

Easy 3h00–6h00

Change Car Spark Plugs

Easy 0h30–0h45

Change Car Timing Belt Kit

Very technical 3h30

Change Car Water Pump

Easy 4h00–8h00
Check the maintenance log for your vehicle →