Change Car Handbrake Cable Chrysler Sebring

Change Car Handbrake Cable

Very easy 0h30 ~50$
Time Estimate 0h30
Cost Estimate ~50$
Difficulty Very easy
Vehicles
Sebring 2001-2006 2
  • 2.4, -LPG LPG,Gas (EDZ)
  • 2.7 V6, -LPG LPG,Gas (EES)
Sebring 2007-2010 2
  • 2.4 Dual VVT Gas (ED3)
  • 2.7 V6 Bioethanol (E85),Gas (EER)
Check the parking brake* 0h30
Adjust the parking brake 0h30
Check the brake pedal travel 0h30
Check the parking brake shoes* 0h30
Remove/refit the left parking brake cable 1h30
Renew the left parking brake cable 1h30
Remove/refit the right parking brake cable 1h30
Renew the right parking brake cable 1h30
Remove/refit both parking brake cables 2h00
Renew both parking brake cables 2h00
Remove/refit the parking brake cable 1h30
Renew the parking brake cable 1h30
Check the parking brake cable* 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Remove/refit the parking brake lever 0h30
Renew the parking brake lever 0h30
Repair the parking brake lever 0h30
Clean the parking brake shoes* 0h30
Mechanical parking brake* 0h30
Difficult parking brake cable removal* 0h30
Remove/refit the rear left parking brake cable 1h30
Renew the rear left parking brake cable 1h30
Remove/refit the rear right parking brake cable 1h30
Renew the rear right parking brake cable 1h30
Remove/refit the parking brake cables 2h00
Renew the parking brake cables 2h00

What is the function of Chrysler Sebring handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my Chrysler Sebring have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the Chrysler Sebring handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change Chrysler Sebring handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.

Related products →
Maintenance plans for your Sebring →

3 generations covered

Generation Years Vehicles Fuel
Sebring 1994-2000 1994-2000 2.0 Gas (ECF), 2.4 Gas (EDZ), 2.5 V6 Gas (EEB (6G73)) Gas
Sebring 2001-2006 2001-2006 2.4 Gas (EY7), 2.4 PZEV LPG,Gas (ED2), 2.4, -LPG LPG,Gas (EDZ), 2.7 V6 FFV LPG,Gas (EEE), 2.7 V6 Gas (EER), 2.7 V6, -LPG LPG,Gas (EES), 3.0 V6 Gas (EF7) Gas, LPG
Sebring 2007-2010 2007-2010 2.4 Dual VVT Gas (ED3), 2.4 PZEV Dual VVT Gas (EDG), 2.7 V6 Bioethanol (E85),Gas (EER), 3.5 V6 Gas (EGF) Bioethanol (E85), Gas

Other repair guides

Change Car Accessory Belt Kit

Easy 0h30–1h00

Change Car Air Filter

Very easy 0h30

Change Car Battery

Very easy 0h45

Change Car Cabin Filter

Very easy 0h30–5h00

Change Car Clutch

Technical 5h00–6h00

Change Car Front Brake Discs and Pads

Easy 1h30

Change Car Front Brake Pads

Easy 0h45

Change Car Fuel Filter

Easy 0h45

Change Car Oil Filter

Easy 0h30

Change Car Rear Silencer

Easy 0h45–1h30

Change Car Shock Absorbers

Easy 3h00–6h00

Change Car Spark Plugs

Easy 0h30–0h45

Change Car Timing Belt Kit

Very technical 3h30

Change Car Water Pump

Easy 4h00–8h00
Check the maintenance log for your vehicle →