Change Car Handbrake Cable Subaru Legacy
Change Car Handbrake Cable
| Temps estimé | 0h30 |
|---|---|
| Coût estimé | ~50€ |
| Difficulté | Very easy |
| Motorisations |
Legacy 1989-1993 1
Legacy 1994-1998 3
Legacy 1998-2003 1
Legacy 2004-2010 1
Legacy 2008-2015 2
Legacy B4 2014-2019 2
|
| Check the parking brake* | 0h30 |
| Adjust the parking brake | 0h30–0h30 |
| Check the brake pedal travel | 0h30 |
| Check the parking brake shoes | 0h30 |
| Remove/refit the left parking brake cable | 1h30 |
| Renew the left parking brake cable | 1h30 |
| Remove/refit the right parking brake cable | 1h30 |
| Renew the right parking brake cable | 1h30 |
| Remove/refit both parking brake cables | 2h00 |
| Renew both parking brake cables | 2h00 |
| Check the parking brake cable* | 0h30 |
| Repair the handbrake cable* | 0h30 |
| Lubricate the parking brake cable* | 0h30 |
| Remove/refit the parking brake lever | 0h30–0h45 |
| Renew the parking brake lever | 0h30–0h45 |
| Repair the parking brake lever | 0h30 |
| Remove/refit the parking brake shoes | 1h00–1h30 |
| Renew the parking brake shoes | 1h00–1h30 |
| Clean the parking brake shoes | 0h30 |
| Mechanical parking brake* | 0h30 |
| Difficult parking brake cable removal* | 0h30 |
| Clean the parking brake shoes* | 0h30 |
| Remove/refit the parking brake cable | 1h30 |
| Renew the parking brake cable | 1h30 |
| Check the parking brake shoes* | 0h30 |
| Repair the parking brake lever* | 0h30 |
What is the function of Subaru Legacy handbrake cables?
The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.
Does my Subaru Legacy have handbrake cables?
Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.
When should you change the Subaru Legacy handbrake cables?
Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.
Is it difficult to change Subaru Legacy handbrake cables?
Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.
6 générations couvertes
| Génération | Période | Motorisations | Carburant |
|---|---|---|---|
| Legacy 1989-1993 | 1989-1993 | 2.2i 16V Gas (EJ22E) | Gas |
| Legacy 1994-1998 | 1994-1998 | 2.2i 16V Gas (EJ22E), 2.2i 16V Gas (EJ22E), 2.5i 16V Gas (EJ25D) | Gas |
| Legacy 1998-2003 | 1998-2003 | 2.2 Gas (EJ22E), 2.5 16V Gas (EJ251), 2.5 16V Gas (EJ253) | Gas |
| Legacy 2004-2010 | 2004-2010 | 2.5i Gas (EJ253), 2.5i Gas (EJ259) | Gas |
| Legacy 2008-2015 | 2008-2015 | 2.5 SOHC Gas (EJ253), 3.6 Gas (EZ36D) | Gas |
| Legacy B4 2014-2019 | 2014-2019 | 2.5 Gas (FB25B), 3.6 Gas (EZ36D) | Gas |