Change Car Accessory Belt Kit Subaru Legacy

Change Car Accessory Belt Kit

Easy 0h30–0h45 ~50–75€
Temps estimé 0h30–0h45
Coût estimé ~50–75€
Difficulté Easy
Motorisations
Legacy 1989-1993 1
  • 2.2i 16V Gas (EJ22E)
Legacy 1994-1998 3
  • 2.2i 16V Gas (EJ22E)
  • 2.2i 16V Gas (EJ22E)
  • 2.5i 16V Gas (EJ25D)
Legacy 1998-2003 1
  • 2.5 16V Gas (EJ251)
Legacy 2004-2010 1
  • 2.5i Gas (EJ253)
Legacy 2008-2015 2
  • 2.5 SOHC Gas (EJ253)
  • 3.6 Gas (EZ36D)
Legacy B4 2014-2019 2
  • 2.5 Gas (FB25B)
  • 3.6 Gas (EZ36D)
Renew the ancillary drive belt With air conditioning 0h30
Renew the ancillary drive belt 0h30–0h45
Renew the engine oil and filter 0h45–1h00

What is a Subaru Legacy accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Subaru Legacy accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Subaru Legacy accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

6 générations couvertes

Génération Période Motorisations Carburant
Legacy 1989-1993 1989-1993 2.2i 16V Gas (EJ22E) Gas
Legacy 1994-1998 1994-1998 2.2i 16V Gas (EJ22E), 2.2i 16V Gas (EJ22E), 2.5i 16V Gas (EJ25D) Gas
Legacy 1998-2003 1998-2003 2.2 Gas (EJ22E), 2.5 16V Gas (EJ251), 2.5 16V Gas (EJ253) Gas
Legacy 2004-2010 2004-2010 2.5i Gas (EJ253), 2.5i Gas (EJ259) Gas
Legacy 2008-2015 2008-2015 2.5 SOHC Gas (EJ253), 3.6 Gas (EZ36D) Gas
Legacy B4 2014-2019 2014-2019 2.5 Gas (FB25B), 3.6 Gas (EZ36D) Gas