Change Car Handbrake Cable Subaru Forester

Change Car Handbrake Cable

Very easy 0h30 ~50€
Temps estimé 0h30
Coût estimé ~50€
Difficulté Very easy
Motorisations
Forester 2003-2012 1
  • 2.5 16V Turbo Gas (EJ255)
Forester 2008-2013 3
  • 2.5 Gas (EJ253)
  • 2.5 Gas (FB25)
  • 2.5 Turbo Gas (EJ255)
Forester 2013-2019 1
  • 2.5 Gas (FB25)
Forester 2019-2025 1
  • 2.5 Gas (FB25D)
Check the parking brake* 0h30
Adjust the parking brake 0h30
Check the brake pedal travel 0h30
Check the parking brake shoes* 0h30
Remove/refit the left parking brake cable 1h30
Renew the left parking brake cable 1h30
Remove/refit the right parking brake cable 1h30
Renew the right parking brake cable 1h30
Remove/refit both parking brake cables 2h00
Renew both parking brake cables 2h00
Check the parking brake cable* 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Remove/refit the parking brake lever 0h30
Renew the parking brake lever 0h30
Repair the parking brake lever 0h30
Remove/refit the parking brake shoes 0h30–1h00
Renew the parking brake shoes 0h30–1h00
Clean the parking brake shoes* 0h30
Mechanical parking brake* 0h30
Difficult parking brake cable removal* 0h30
Remove/refit the parking brake cable 1h00
Renew the parking brake cable 1h00
Repair the parking brake lever* 0h30

What is the function of Subaru Forester handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my Subaru Forester have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the Subaru Forester handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change Subaru Forester handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.

Voir tous les produits compatibles →
Consultez le carnet d'entretien de votre Forester →

5 générations couvertes

Génération Période Motorisations Carburant
Forester 1997-2002 1997-2002 2.5 SOHC Gas (EJ251) Gas
Forester 2003-2012 2003-2012 2.5 16V Turbo Gas (EJ255), 2.5 Gas (EJ253), 2.5 SOHC Gas (EJ251) Gas
Forester 2008-2013 2008-2013 2.5 Gas (EJ253), 2.5 Gas (FB25), 2.5 Turbo Gas (EJ255) Gas
Forester 2013-2019 2013-2019 2.0T DOHC Gas (FA20F), 2.5 Gas (FB25) Gas
Forester 2019-2025 2019-2025 2.5 Gas (FB25D) Gas

Nos autres guides de réparation

Change Car Accessory Belt Kit

Easy 0h30–0h45

Change Car Air Filter

Very easy 0h30

Change Car Battery

Very easy 0h30–0h30

Change Car Cabin Filter

Very easy 0h30

Change Car Clutch

Technical 10h00

Change Car Front Brake Discs and Pads

Easy 1h00–1h30

Change Car Front Brake Pads

Easy 1h00

Change Car Fuel Filter

Easy 0h30–2h00

Change Car Oil Filter

Easy 0h30

Change Car Rear Silencer

Easy 0h30–1h30

Change Car Shock Absorbers

Easy 2h00

Change Car Spark Plugs

Easy 0h45–2h30

Change Car Timing Belt Kit

Very technical 3h30–5h00

Change Car Turbo

Very technical 5h00

Change Car Water Pump

Easy 2h00–5h00
Consultez le carnet d'entretien de votre Forester →