Change Car Accessory Belt Kit Subaru Forester

Change Car Accessory Belt Kit

Easy 0h30–0h45 ~50–75€
Temps estimé 0h30–0h45
Coût estimé ~50–75€
Difficulté Easy
Motorisations
Forester 2003-2012 1
  • 2.5 16V Turbo Gas (EJ255)
Forester 2008-2013 2
  • 2.5 Gas (EJ253)
  • 2.5 Turbo Gas (EJ255)
Forester 2019-2025 1
  • 2.5 Gas (FB25D)
Renew the ancillary drive belt 0h30–0h45
Renew the engine oil and filter 0h45

What is a Subaru Forester accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Subaru Forester accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Subaru Forester accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

5 générations couvertes

Génération Période Motorisations Carburant
Forester 1997-2002 1997-2002 2.5 SOHC Gas (EJ251) Gas
Forester 2003-2012 2003-2012 2.5 16V Turbo Gas (EJ255), 2.5 Gas (EJ253), 2.5 SOHC Gas (EJ251) Gas
Forester 2008-2013 2008-2013 2.5 Gas (EJ253), 2.5 Gas (FB25), 2.5 Turbo Gas (EJ255) Gas
Forester 2013-2019 2013-2019 2.0T DOHC Gas (FA20F), 2.5 Gas (FB25) Gas
Forester 2019-2025 2019-2025 2.5 Gas (FB25D) Gas