Change Car Handbrake Cable Mitsubishi Galant

Change Car Handbrake Cable

Very easy 0h30 ~50$
Time Estimate 0h30
Cost Estimate ~50$
Difficulty Very easy
Vehicles
Galant VI 1988-1993 2
  • 2.0 16V DOHC Gas (4G63)
  • 2.0 8V SOHC Gas (4G63)
Galant VIII 1997-2005 1
  • 2.4 16V DOHC GDi Gas (4G64)
Check the parking brake* 0h30
Adjust the parking brake 0h30–0h30
Check the brake pedal travel 0h30
Carry out the parking brake basic adjustment procedure 0h30
Check the parking brake shoes* 0h30
Remove/refit the left parking brake cable 2h00
Renew the left parking brake cable 2h00
Remove/refit the right parking brake cable 2h00
Renew the right parking brake cable 2h00
Remove/refit both parking brake cables 2h00
Renew both parking brake cables 2h00
Make parking brake compensator functional 0h30
Remove/refit the parking brake cable 1h00–1h30
Renew the parking brake cable 1h00–1h30
Check the parking brake cable 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Remove/refit the parking brake lever 0h30–0h45
Renew the parking brake lever 0h30–0h45
Repair the parking brake lever 0h30
Clean the parking brake shoes* 0h30
Mechanical parking brake* 0h30
Difficult parking brake cable removal* 0h30
Remove/refit the left parking brake cable (disc brakes) (rear axle) 1h30
Renew the left parking brake cable (disc brakes) (rear axle) 1h30
Remove/refit the right parking brake cable (disc brakes) (rear axle) 1h30
Renew the right parking brake cable (disc brakes) (rear axle) 1h30
Remove/refit both parking brake cables (brake discs) (rear axle) 2h30
Renew both parking brake cables (disc brakes) (rear axle) 2h30
Check the parking brake cable* 0h30
Remove/refit the parking brake shoes 2h30
Renew the parking brake shoes 2h30
Clean the parking brake shoes 0h30

What is the function of Mitsubishi Galant handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my Mitsubishi Galant have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the Mitsubishi Galant handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change Mitsubishi Galant handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.

4 generations covered

Generation Years Vehicles Fuel
Galant IX 2003-2025 2003-2025 2.4 16V DOHC Gas (4G69), 3.8 Gas (6G75), 3.8 V6 SOHC 24V Gas (6G75) Gas
Galant VI 1988-1993 1988-1993 2.0 16V DOHC Gas (4G63), 2.0 16V DOHC Turbo Gas (4G63), 2.0 8V SOHC Gas (4G63) Gas
Galant VII 1992-1998 1992-1998 2.4 16V DOHC Gas (4G64) Gas
Galant VIII 1997-2005 1997-2005 2.4 16V DOHC Gas (4G64), 2.4 16V DOHC GDi Gas (4G64), 3.0 V6 24V SOHC Gas (6G72) Gas