Mitsubishi Galant Maintenance Plans

The Mitsubishi Galant spans multiple generations and engine options, so maintenance needs can vary by model year and powertrain. Use the selector to match your Galant’s generation and engine for the most accurate service items and intervals.

Select your Mitsubishi model below to access the maintenance schedule tailored to your vehicle.

4 generations covered

Generation Years Vehicles Fuel
Galant IX 2003-2025 2003-2025 2.4 16V DOHC Gas (4G69), 3.8 Gas (6G75), 3.8 V6 SOHC 24V Gas (6G75) Gas
Galant VI 1988-1993 1988-1993 2.0 16V DOHC Gas (4G63), 2.0 16V DOHC Turbo Gas (4G63), 2.0 8V SOHC Gas (4G63) Gas
Galant VII 1992-1998 1992-1998 2.4 16V DOHC Gas (4G64) Gas
Galant VIII 1997-2005 1997-2005 2.4 16V DOHC Gas (4G64), 2.4 16V DOHC GDi Gas (4G64), 3.0 V6 24V SOHC Gas (6G72) Gas

Maintenance depending on the engine type

Gas Mitsubishi Galant maintenance

Gas Mitsubishi Galant models commonly use Mitsubishi’s 4G-series inline engines and 6G-series V6s, including 4G63/4G64/4G69 and V6 options like 6G72 and 6G75. Keep oil and filter changes consistent, since older and higher-mileage engines can be sensitive to neglected oil service and oil level checks. Pay attention to ignition service (spark plugs and coils/leads where fitted), air filtration, and vacuum/PCV hoses, as these can affect drivability and fuel economy over time. If your Galant uses GDI, plan for closer attention to intake and fuel-system condition, and address rough idle or hesitation early to avoid secondary issues.

Routine Mitsubishi maintenance jobs

The operations listed below reflect typical Mitsubishi Galant maintenance tasks, but the exact cadence depends on the generation and engine you select. Always follow the schedule shown for your specific vehicle, especially where mileage/time intervals differ.

Job Interval Notes
Oil and filter changeVoir sélecteur ci-dessusVaries by engine and recommended oil grade
Air filter19,000 to 37,000 milesMore often in urban or dusty driving
Cabin filter9,000 to 19,000 miles or 1 yearAffects air conditioning and air quality
Brake fluid2 years (all models)Regardless of mileage
CoolantPer manufacturer (typically 5 years or 62,000 miles)Check level and condition (color, deposits) at every service
Front brake padsDepending on use (typically 19,000 to 37,000 miles)Wear depends on driving style and load carried
Timing beltVoir sélecteur ci-dessusInterval varies widely by engine
Spark plugs (gasoline)19,000 to 37,000 milesGasoline engines only

Mitsubishi electronic diagnostics

If the check engine light comes on, a scan tool can read OBD2 DTCs and point you toward the affected system before you start replacing parts. Codes are grouped by categories such as fuel/air metering, ignition misfire, emissions controls (including catalytic converter and lambda sensor), and EVAP leaks. For code lookups and next steps tailored to this model line, see Mitsubishi Galant OBD2 fault codes. Confirm repairs with live data and a road test where possible.

What the Mitsubishi technical manual covers

A maintenance plan tells you what to do and when, but the job still comes down to correct procedures and specifications. A Haynes repair manual for your Mitsubishi Galant can help with step-by-step methods, tightening sequences and torque specs, fluid types and capacities, and component locations shown with diagrams. This is especially useful when the schedule calls for items that vary by engine, such as plugs, belts, or cooling-system service. Pick the manual that matches your Galant’s year and engine to avoid guesswork.

Mitsubishi Products