Change Car Handbrake Cable BMW 3-Series GT

Change Car Handbrake Cable

Very easy 0h30 ~50€
Temps estimé 0h30
Coût estimé ~50€
Difficulté Very easy
Check the parking brake* 0h30
Adjust the parking brake 0h45
Check the brake pedal travel 0h30
Check the parking brake shoes 0h30
Remove/refit the left parking brake cable 2h00
Renew the left parking brake cable 2h00
Remove/refit the right parking brake cable 2h00
Renew the right parking brake cable 2h00
Remove/refit both parking brake cables 2h30
Renew both parking brake cables 2h30
Remove/refit the parking brake cable 2h30
Renew the parking brake cable 2h30
Check the parking brake cable* 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Remove/refit the parking brake lever rubber handle 0h30
Renew the parking brake lever rubber handle 0h30
Remove/refit the parking brake lever 1h30
Renew the parking brake lever 1h30
Repair the parking brake lever 0h30
Remove/refit the parking brake shoes 1h30
Renew the parking brake shoes 1h30
Clean the parking brake shoes* 0h30
Mechanical parking brake* 3h00
Difficult parking brake cable removal* 0h30
Remove/refit the left parking brake cable Saloon 2h00
Remove/refit the left parking brake cable Estate 2h30
Renew the left parking brake cable Saloon 2h00
Renew the left parking brake cable Estate 2h30
Remove/refit the right parking brake cable Saloon 2h00
Remove/refit the right parking brake cable Estate 2h30
Renew the right parking brake cable Saloon 2h00
Renew the right parking brake cable Estate 2h30
Remove/refit the parking brake lever Saloon 1h30
Remove/refit the parking brake lever Estate 2h00
Renew the parking brake lever Saloon 2h00
Renew the parking brake lever Estate 2h00

What is the function of BMW 3-Series GT handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my BMW 3-Series GT have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the BMW 3-Series GT handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change BMW 3-Series GT handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.