Change Car Rear Silencer Toyota Camry
Change Car Rear Silencer
| Time Estimate | 1h30 |
|---|---|
| Cost Estimate | ~150$ |
| Difficulty | Easy |
| Vehicles |
Camry 1986-1991 2
Camry 1991-1997 2
Camry 1996-2001 1
Camry 2001-2006 2
Camry 2006-2011 2
Camry 2011-2018 2
|
| Repair the silencer* | 1h30 |
| Remove/refit the front silencer | 0h45 |
| Renew the front silencer | 1h00–1h30 |
| Repair the front silencer | 0h45 |
| Align the front silencer | 0h30 |
| Remove/refit the main silencer | 0h45 |
| Renew the main silencer | 1h00–1h30 |
| Repair the main silencer | 0h30 |
| Align the main silencer | 0h30 |
| Difficult main silencer removal* | 0h30 |
| Remove/refit the rear silencer | 0h45 |
| Renew the rear silencer | 0h45–1h30 |
| Repair the rear silencer | 0h30 |
| Weld a sheet-metal repair panel onto the rear silencer* | 0h30–0h45 |
| Difficult rear silencer removal | 0h30 |
| Remove/refit the rear silencer trim | 0h30 |
| Renew the rear silencer trim | 0h30 |
| Remove/refit the exhaust pipe bracket | 0h45 |
| Renew the exhaust pipe bracket | 0h45 |
| Repair the front silencer* | 1h30 |
| Align the front silencer* | 0h30 |
| Align the main silencer* | 0h30 |
| Difficult rear silencer removal* | 0h30 |
| Remove/refit both rear silencer trims | 0h30 |
| Renew both rear silencer trims | 0h30 |
| Repair the main silencer* | 0h30–1h30 |
| Repair the rear silencer* | 0h30–1h30 |
What is a Toyota Camry rear silencer?
The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.
When should you change the Toyota Camry rear silencer?
No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.
Is it difficult to change the Toyota Camry rear silencer?
Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.
7 generations covered
| Generation | Years | Vehicles | Fuel |
|---|---|---|---|
| Camry 1983-1986 | 1983-1986 | 1.8 D Diesel (1C-TL), 2.0 D Diesel (2C-TL), 2.0 Gas (2S-ELC) | Diesel, Gas |
| Camry 1986-1991 | 1986-1991 | 2.0i 16V Gas (3S-FE), 2.5i V6 Gas (2VZ-FE) | Gas |
| Camry 1991-1997 | 1991-1997 | 2.2i Gas (5S-FE), 3.0 V6 Gas (1MZ-FE), 3.0 V6 Gas (3VZ-FE) | Gas |
| Camry 1996-2001 | 1996-2001 | 2.2 CNG CNG (5S-FNE), 2.2 Gas (5S-FE), 3.0 24V Gas (1MZ-FE) | CNG, Gas |
| Camry 2001-2006 | 2001-2006 | 2.4 16V VVT-i Gas (2AZ-FE), 3.0 24V VVT-i Gas (1MZ-FE), 3.0 Gas (1MZ-FE), 3.3 Gas (3MZ-FE) | Gas |
| Camry 2006-2011 | 2006-2011 | 2.4 16V VVT-i Gas (2AZ-FE), 3.5 V6 Gas (2GR-FE) | Gas |
| Camry 2011-2018 | 2011-2018 | 2.5 Gas (2AR-FE), 3.5 V6 Gas (2GR-FE) | Gas |