Change Car Rear Silencer Chrysler Town & Country

Change Car Rear Silencer

Easy 0h45 ~75$
Time Estimate 0h45
Cost Estimate ~75$
Difficulty Easy
Vehicles
Town & Country 2000-2007 1
  • 3.8 V6 Gas (EGH)
Remove/refit the silencer 0h45
Renew the silencer 0h45
Repair the silencer* 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Remove/refit the main silencer 0h45
Renew the main silencer 0h45
Repair the main silencer 0h30
Align the main silencer* 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h45
Renew the rear silencer 0h45
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h45
Difficult rear silencer removal* 0h30

What is a Chrysler Town & Country rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Chrysler Town & Country rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Chrysler Town & Country rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

2 generations covered

Generation Years Vehicles Fuel
Town & Country 2000-2007 2000-2007 3.8 V6 Gas (EGH) Gas
Town & Country 2007-2016 2007-2016 3.6 V6 VVT Gas (ERB), 4.0 V6 SOHC Gas (EGQ) Gas