Change Car Rear Silencer Chrysler Grand Voyager

Change Car Rear Silencer

Easy 0h45–1h30 ~75–150€
Temps estimé 0h45–1h30
Coût estimé ~75–150€
Difficulté Easy
Motorisations
Grand Voyager 1991-1995 1
  • 3.3 i V6 Gas (EGA)
Grand Voyager 1995-2001 3
  • 2.4, -LPG LPG,Gas (EDZ)
  • 3.3 V6, -LPG LPG,Gas (EGA)
  • 3.8 V6 SMPI, -LPG LPG,Gas (EGH)
Grand Voyager 2000-2008 3
  • 2.4 16V, -LPG LPG,Gas (EDZ)
  • 3.3 V6 Flexfuel Bioethanol (E85),Gas (EGM)
  • 3.3 V6, -LPG LPG,Gas (EGA)
Repair the silencer* 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Repair the main silencer 0h30
Align the main silencer* 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h45
Renew the rear silencer 0h45
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h45
Difficult rear silencer removal* 0h30
Remove/refit the main silencer 0h45
Renew the main silencer 0h45
Remove/refit the rear silencer trim 0h30
Renew the rear silencer trim 0h30
Remove/refit both rear silencer trims 0h30
Renew both rear silencer trims 0h30
Remove/refit the silencer 0h45
Renew the silencer 0h45
Repair the main silencer* 1h30
Repair the rear silencer* 1h30

What is a Chrysler Grand Voyager rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Chrysler Grand Voyager rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Chrysler Grand Voyager rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

Voir tous les produits compatibles →
Consultez le carnet d'entretien de votre Grand Voyager →

3 générations couvertes

Génération Période Motorisations Carburant
Grand Voyager 1991-1995 1991-1995 3.3 i V6 Gas (EGA), 3.8 Gas (EGH) Gas
Grand Voyager 1995-2001 1995-2001 2.4, -LPG LPG,Gas (EDZ), 3.3 V6 Gas (EGM), 3.3 V6, -LPG LPG,Gas (EGA), 3.8 V6 SMPI, -LPG LPG,Gas (EGH) Gas, LPG
Grand Voyager 2000-2008 2000-2008 2.4 16V, -LPG LPG,Gas (EDZ), 3.0 Gas (EFA), 3.3 V6 Flexfuel Bioethanol (E85),Gas (EGM), 3.3 V6, -LPG LPG,Gas (EGA), 3.3 V6, -LPG LPG,Gas (EGA) Bioethanol (E85), Gas, LPG

Nos autres guides de réparation

Change Car Accessory Belt Kit

Easy 0h30

Change Car Air Filter

Very easy 0h30

Change Car Battery

Very easy 0h30–0h30

Change Car Cabin Filter

Very easy 0h30

Change Car Clutch

Technical 3h30–6h00

Change Car Front Brake Discs and Pads

Easy 1h30

Change Car Front Brake Pads

Easy 0h45

Change Car Fuel Filter

Easy 0h30–0h45

Change Car Handbrake Cable

Very easy 0h30

Change Car Oil Filter

Easy 0h30

Change Car Shock Absorbers

Easy 3h00–4h00

Change Car Spark Plugs

Easy 0h30–1h30

Change Car Timing Belt Kit

Very technical 3h00–4h00

Change Car Water Pump

Easy 1h00–5h00
Consultez le carnet d'entretien de votre Grand Voyager →