Change Car Handbrake Cable Toyota Celica
Change Car Handbrake Cable
| Time Estimate | 0h30 |
|---|---|
| Cost Estimate | ~50$ |
| Difficulty | Very easy |
| Vehicles |
Celica V 1990-1994 3
Celica VI 1994-1999 2
|
| Check the parking brake* | 0h30 |
| Adjust the parking brake | 0h30–0h30 |
| Check the brake pedal travel | 0h30 |
| Carry out the parking brake basic adjustment procedure | 0h30 |
| Check the parking brake shoes | 0h30 |
| Remove/refit both parking brake cables | 2h00–3h00 |
| Renew both parking brake cables | 2h00–3h00 |
| Remove/refit the front parking brake cable | 0h30–1h30 |
| Renew the front parking brake cable | 0h30–1h30 |
| Make parking brake compensator functional | 0h30 |
| Renew the parking brake release lever | 0h30 |
| Remove/refit the parking brake release lever | 0h30 |
| Remove/refit the parking brake cable | 1h30–2h30 |
| Renew the parking brake cable | 1h30–2h30 |
| Check the parking brake cable | 0h30 |
| Repair the handbrake cable* | 0h30 |
| Lubricate the parking brake cable* | 0h30 |
| Remove/refit the parking brake lever | 0h45 |
| Renew the parking brake lever | 0h45 |
| Repair the parking brake lever | 0h30 |
| Repair the handbrake cable tensioner roller* | 0h30 |
| Remove/refit the parking brake shoes | 2h00 |
| Renew the parking brake shoes | 2h00 |
| Clean the parking brake shoes | 0h30 |
| Mechanical parking brake* | 0h30 |
| Difficult parking brake cable removal* | 0h30 |
| Remove/refit the left parking brake cable (disc brakes) (rear axle) | 2h00 |
| Renew the left parking brake cable (disc brakes) (rear axle) | 2h00 |
| Remove/refit the right parking brake cable (disc brakes) (rear axle) | 2h00 |
| Renew the right parking brake cable (disc brakes) (rear axle) | 2h00 |
| Check the parking brake cable* | 0h30 |
| Clean the parking brake shoes* | 0h30 |
What is the function of Toyota Celica handbrake cables?
The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.
Does my Toyota Celica have handbrake cables?
Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.
When should you change the Toyota Celica handbrake cables?
Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.
Is it difficult to change Toyota Celica handbrake cables?
Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.
5 generations covered
| Generation | Years | Vehicles | Fuel |
|---|---|---|---|
| Celica II 1977-1981 | 1977-1981 | 2.8 Gas (5M-E) | Gas |
| Celica III 1981-1985 | 1981-1985 | 2.4 Gas (22R), 2.4 Gas (22R-EC), 2.8 Gas (5M-GE) | Gas |
| Celica IV 1985-1992 | 1985-1992 | 2.0 Gas (2S-ELC), 2.0 Gas (3S-FE), 2.0 Gas (3S-GELC), 2.0 Gas (3S-GTE) | Gas |
| Celica V 1990-1994 | 1990-1994 | 1.6i 16V Gas (4A-FE), 2.0i 16V Turbo 4WD Gas (3S-GTE), 2.2i 16V GTi Gas (5S-FE) | Gas |
| Celica VI 1994-1999 | 1994-1999 | 1.8i Gas (7A-FE), 2.2i Gas (5S-FE) | Gas |