Change Car Accessory Belt Kit Honda Aerodeck
Change Car Accessory Belt Kit
| Temps estimé | 0h30 |
|---|---|
| Coût estimé | ~50€ |
| Difficulté | Easy |
| Motorisations |
Aerodeck 1985-1993 1
|
| Renew the ancillary drive belt | 0h30 |
| Renew the engine oil and filter | 0h45 |
What is a Honda Aerodeck accessory belt?
The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.
When should you change the Honda Aerodeck accessory belt?
Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.
Is it difficult to change the Honda Aerodeck accessory belt?
Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.
3 générations couvertes
| Génération | Période | Motorisations | Carburant |
|---|---|---|---|
| Aerodeck 1985-1993 | 1985-1993 | 2.0 12V Gas (A20A1), 2.0 12V Gas (A20A3) | Gas |
| Aerodeck 1989-1993 | 1989-1993 | 2.2 16V Gas (F22A1), 2.2 16V Gas (F22A4), 2.2 16V Gas (F22A6) | Gas |
| Aerodeck 1993-1999 | 1993-1999 | 2.2 16V /VTEC Gas (F22B1), 2.2 16V Gas (F22B2), 2.7 24V Gas (C27A4) | Gas |