Change Car Accessory Belt Kit Chrysler Voyager

Change Car Accessory Belt Kit

Easy 0h30 ~50€
Temps estimé 0h30
Coût estimé ~50€
Difficulté Easy
Motorisations
Voyager 1991-1995 1
  • 3.3 i V6 Gas (EGA)
Voyager 1995-2001 3
  • 2.4, -LPG LPG,Gas (EDZ)
  • 3.3 V6, -LPG LPG,Gas (EGA)
  • 3.8 V6 SMPI, -LPG LPG,Gas (EGH)
Voyager 2000-2008 3
  • 2.4 16V, -LPG LPG,Gas (EDZ)
  • 3.3 V6 Flexfuel Bioethanol (E85),Gas (EGM)
  • 3.3 V6, -LPG LPG,Gas (EGA)
Renew the air-conditioning compressor drive belt 0h30
Renew the ancillary drive belt 0h30
Renew the engine oil and filter 0h45
Renew the ancillary drive belt With air conditioning 0h30

What is a Chrysler Voyager accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Chrysler Voyager accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Chrysler Voyager accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

3 générations couvertes

Génération Période Motorisations Carburant
Voyager 1991-1995 1991-1995 3.3 i V6 Gas (EGA), 3.8 Gas (EGH) Gas
Voyager 1995-2001 1995-2001 2.4, -LPG LPG,Gas (EDZ), 3.3 V6 Gas (EGM), 3.3 V6, -LPG LPG,Gas (EGA), 3.8 V6 SMPI, -LPG LPG,Gas (EGH) Gas, LPG
Voyager 2000-2008 2000-2008 2.4 16V, -LPG LPG,Gas (EDZ), 3.0 Gas (EFA), 3.3 V6 Flexfuel Bioethanol (E85),Gas (EGM), 3.3 V6, -LPG LPG,Gas (EGA), 3.3 V6, -LPG LPG,Gas (EGA) Bioethanol (E85), Gas, LPG