Change Car Rear Silencer Volkswagen Scirocco

Change Car Rear Silencer

Easy 1h30 ~150€
Temps estimé 1h30
Coût estimé ~150€
Difficulté Easy
Motorisations
Scirocco II 1982-1992 2
  • 1.8 16V Gas (PL)
  • 1.8 Gas (JH)
Repair the silencer* 1h30
Remove/refit the front silencer 0h45–1h30
Renew the front silencer 0h45–1h30
Renew both front silencers 1h30
Remove/refit both front silencers 1h30
Repair the front silencer 0h30
Align the front silencer 0h30
Remove/refit the main silencer 0h45
Remove/refit the centre silencer (follow-up work) 0h30
Renew the main silencer 0h45
Renew the centre silencer (follow-up work) 0h30
Remove/refit both centre silencers 0h45
Renew both centre silencers 0h45
Repair the main silencer 0h30
Align the main silencer 0h30–0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h30
Renew the rear silencer 0h30
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h30
Difficult rear silencer removal 0h30
Remove/refit the rear silencer trim 0h30
Renew the rear silencer trim 0h30
Remove/refit both rear silencer trims 0h30
Renew both rear silencer trims 0h30
Remove/refit the exhaust pipe bracket 0h30
Renew the exhaust pipe bracket 0h30

What is a Volkswagen Scirocco rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Volkswagen Scirocco rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Volkswagen Scirocco rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

2 générations couvertes

Génération Période Motorisations Carburant
Scirocco I 1974-1983 1974-1983 1.5 Gas (EH), 1.5 Gas (FC (FG)), 1.6 Gas (EE), 1.6 Gas (EJ), 1.6 Gas (FN), 1.7 Gas (EN) Gas
Scirocco II 1982-1992 1982-1992 1.8 16V Gas (PL), 1.8 Gas (JH) Gas